Over 16,538,453 people are on fubar.
What are you waiting for?
s shall be uniquely identified by part number. Standard purchased items shall be identified by the original manufacturer's name and part number. 9.3.6.2 The vendor shall indicate on each of these twitter.com complete parts lists all those parts that are recommended as start-up or maintenance spares, and the recommended stocking quantities of each. These should include spare parts recommendations from sub-suppliers that were not available for inclusion in the vendor's original proposal 9.3.7 Installation, Operation, Maintenance and Technical Data Manuals 9.3.7.1
General The vendor shall provide sufficient written instructions and all necessary drawings to enable the purchaser to install, operate, and maintain all of the equipment covered by the purchase order. This information shall be compiled in a manual or manuals with a cover sheet showing the information listed in ansi standards 9.1.2, an index sheet, and a complete list of the enclosed drawings by title and drawing number. The manual or manuals shall be prepared specifically for the equipment covered by the purchase order.
"Typical" manuals shall not be provided. 9.3.7.2 Installation Manual All information required for the proper installation of the equipment shall be compiled in a manual that must be issued no later than the time of issue of final certified drawings. The installation manual may be separate from the operating and maintenance RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES instructions. The installation manual shall contain information on alignment and grouting procedures, normal and maximum utility requirements, centers of mass, rigging provisions and procedures, and all other installation data. All drawings and data specified in 9.2.2 and 9.2.3 that are pertinent to proper installation shall be included as part of this manual (see description of line item 64 in Annex F). 9.3.7.3 Operating and Maintenance Manuals A manual containing all required operating and maintenance instructions ieee download shall be supplied no later than two weeks after all specified tests have been successfully completed. In addition to covering operation at all spec
